Do you have a question about the Toro 51957 and is the answer not in the manual?
Type | String Trimmer |
---|---|
Power Source | Gas |
Cutting Width | 17 inches |
Line Diameter | 0.095 inches |
Line Feed | Bump Feed |
Handle Type | Loop Handle |
Warranty | 2 years |
Engine Type | 2-Cycle |
Cutting Path | 17 inches |
Fuel Tank Capacity | 14.9 oz |
Shaft Type | Straight Shaft |
Rules for safe operation of the string trimmer, including guards and attachments.
Explains DANGER, WARNING, CAUTION, and NOTICE signal words.
Defines symbols related to safety alerts, manual references, and fuel types.
Details engine, cutting width, line size, and weight for the trimmer models.
Describes the engine, grass deflector, grass shield, and ergonomic design.
Illustrates and labels parts of the Curved Shaft and Straight Shaft Trimmers.
Instructions for unpacking, checking contents, and inspecting for damage.
Lists included parts and provides critical warnings regarding missing or damaged components.
Steps for attaching and detaching trimmer attachments to the power head.
Guide for securely installing the front handle using provided screws.
Instructions for attaching the grass deflector to both curved and straight shaft trimmers.
Outlines trimmer uses, fuel mixture, and safe fueling procedures.
Advises against using fuels with ethanol content over 10% to prevent damage.
Step-by-step guide for starting cold/warm engines and stopping the trimmer.
Instructions for operating curved and straight shaft trimmers, including proper posture.
How to advance cutting line and general tips for effective and safe trimming.
Detailed steps for loading new cutting line into the Reel-Easy™ string head.
Guidance on cleaning the product, avoiding solvents, and general upkeep.
Procedures for checking fasteners, fuel cap, tank, and lines for leaks or issues.
Steps to remove, clean, and re-oil the air filter for optimal engine performance.
Instructions for replacing the spark arrestor screen to maintain engine performance.
Guide for replacing the spark plug, including gap specifications and proper installation.