Carefully remove rider and other parts from carton. Use chart below to ensure all parts have been
shipped.
Seat
Wire Tie
Clamp
1
1
1 Install Seat, page 10.
Seat Spacer 4
Locknut 4
Front Wheel Assembly 2
Flat Washer 2 Install Front Wheels, page 10.
Hub Cap 2
Cotter Pin 2
Steering Wheel 1
Roll Pin 1 Install Steering Wheel Assembly, page 10.
Steering Shaft Cover 1
Key 1 Use in Ignition Switch.
Capscrew 2 Secure battery cables to battery, page 11.
Wing Nut 2
Hose coupling 1 Connect garden hose to washout port
during maintenance
Operator`s Manual 1 Read manual before operating rider.
Registration Card 1 Fill out and mail to Toro.
Hang Tag 1 Read for Warranty Information.
To Next Page
Loading...
