Toro 70184 - User Manual

Questions and Answers

K
Kelly GardnerAug 15, 2025
Why my Toro 70184 engine will not start?
- J
  Jordan AllenAug 15, 2025
  If your Toro Lawn Mower engine won't start, starts hard, or fails to keep running, try the following: Ensure you are sitting on the seat, fill the fuel tank with gasoline, clean or replace the air cleaner element, install the wire on the spark plug, install a new, correctly-gapped spark plug, adjust the throttle cable, replace the fuel filter, adjust the carburetor idle speed and idle mixture, remove the spark plug and dry it, or charge the battery. If the problem persists, contact an Authorized Service Dealer.
M
marvin20Aug 18, 2025
How to fix Toro 70184 Lawn Mower when starter does not crank?
- A
  Amanda SantanaAug 18, 2025
  If your Toro Lawn Mower's starter does not crank, try the following: Move the PTO to the Disengaged position, set the parking brake, charge the battery, check the electrical connections for good contact, or replace the fuse. If these steps do not resolve the issue, contact an Authorized Service Dealer.
J
Joel DavisAug 22, 2025
What to do if Toro 70184 Lawn Mower engine loses power?
- D
  Dustin HuffAug 22, 2025
  If the Toro Lawn Mower engine loses power, try reducing the ground speed, cleaning the air cleaner element, adding oil to the crankcase, removing any obstructions from the cooling fins and air passages, installing a new, correctly-gapped spark plug, or replacing the fuel filter. If the issue continues, contact an Authorized Service Dealer.
T
Timothy DavisAug 26, 2025
What to do if Toro Lawn Mower grass collector fails to fill?
- D
  Denise LewisAug 26, 2025
  If your Toro Lawn Mower's grass collector fails to fill, try raising the cutting height, waiting until the grass has dried, sharpening or replacing the cutting blade, or removing any obstructions from the discharge area.
L
laurawalkerAug 28, 2025
Why is the cutting height uneven on my Toro 70184?
- G
  grogersAug 28, 2025
  If the cutting height of your Toro Lawn Mower is uneven, try setting the tire pressure, leveling the mower, or cleaning the underside of the mower.
M
michaelkellerAug 31, 2025
Why is my Toro 70184 engine overheating?
- L
  Louis SchmidtAug 31, 2025
  If your Toro Lawn Mower engine overheats, try reducing the ground speed, adding oil to the crankcase, or removing any obstructions from the cooling fins and air passages.
M
Michael PittsSep 4, 2025
How to stop abnormal vibration in Toro 70184?
- B
  Brandi BennettSep 4, 2025
  If you notice an abnormal vibration in your Toro Lawn Mower, try installing a new cutting blade, tightening the blade mounting bolt, tightening the engine mounting bolts, or tightening the appropriate pulley. If the vibration persists, contact an Authorized Service Dealer.
C
Christopher KelleySep 7, 2025
How to improve cutting quality of Toro 70184?
- S
  Sheila MooreSep 7, 2025
  To improve the cutting quality of your Toro Lawn Mower, try sharpening or replacing the cutting blade, or adjusting the cutting height.
E
Eric MorganSep 12, 2025
What to do if my Toro 70184 does not drive?
- W
  wilsonjamesSep 12, 2025
  To resolve the issue of the Toro Lawn Mower not driving, move the drive control to the Operate position. If the issue persists, contact an Authorized Service Dealer.