Operation
20
Attachment Power Lift
The attachment power lift (Fig. 17) is used to raise
and lower attachments.
m–3258
1
Figure 17
1. Attachment power lift
Raising Attachments
1. Start the tractor.
2. Pull the lift lever UP to raise the attachment
(Fig. 18). This will lift and hold the attachment
in the raised position.
POTENTIAL HAZARD
• When the engine is off, attachments in the
raised position can gradually lower.
WHAT CAN HAPPEN
• Someone nearby may be pinned or injured
by the attachment as it lowers.
HOW TO AVOID THE HAZARD
• Always lower the attachment lift each time
you shut off the tractor.
Lowering Attachments
1. Start the tractor.
2. Push the lift lever DOWN to lower the
attachment (Fig. 18).
1
2
Figure 18
1. Lift lever–Up 2. Lift lever–Down
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1. To adjust, move the lever sideways to unlock
seat (Fig. 19).
2. Slide the seat to the desired position and release
the lever to lock the seat into position.
1
m–3320
Figure 19
1. Adjustment lever
To Next Page
Loading...
