Toro 74271 - User Manual

64 pages

Save Page as PDF

To Next Page

To Next Page

Loading...

Form No. 3357-693 Rev A

Z558 Z Master, with 52in, 60in

or 72in TURBO FORCE® Side

Discharge Mower

Model No. 74271 —Serial No. 270000001 and Up

Model No. 74272 —Serial No. 270000001 and Up

Model No. 74273 —Serial No. 270000001 and Up

Register your product at www.Toro.com Original Instructions (EN)

Table of Contents

Questions and Answers

B
Brenda LopezSep 8, 2025
What to do if the blades on my Toro 74271 Lawn Mower do not rotate?
- S
  Sharon RuizSep 8, 2025
  If your Toro Lawn Mower blades do not rotate, there are several potential causes: * The drive belt might be worn, loose, or broken; check the belt tension. * The drive belt might be off the pulley; install the drive belt and check the adjusting shafts and belt guides for the correct position. * The deck belt might be worn, loose, or broken; install a new deck belt. * The deck belt might be off the pulley; install the deck pulley and check the idler pulley, idler arm, and spring for the correct position and function. * The idler spring might be broken or missing; replace the spring.
K
kimberly67Sep 9, 2025
Why is my Toro 74271 vibrating so much?
- G
  Gary WilliamsSep 10, 2025
  If your Toro Lawn Mower is vibrating abnormally, check the following: * The cutting blades may be bent or unbalanced; install new cutting blades. * The blade mounting bolt may be loose; tighten the blade mounting bolt. * The engine mounting bolts may be loose; tighten the engine mounting bolts. * A loose engine pulley, idler pulley, or blade pulley; tighten the appropriate pulley.
J
Janet WilkinsSep 12, 2025
What to do if my Toro 74271 Lawn Mower does not drive?
- D
  David PachecoSep 12, 2025
  If your Toro Lawn Mower is not driving, consider these potential issues: * The bypass valve may not be closed tight; tighten the bypass valve. * The drive or pump belt may be worn, loose, or broken; change the belt. * The drive or pump belt may be off a pulley; change the belt. * The idler spring may be broken or missing; replace the spring. * The hydraulic fluid level may be low or too hot; add hydraulic fluid to the reservoir or let it cool down.
C
currystephanieSep 13, 2025
How to fix an uneven cutting height on my Toro 74271?
- K
  Katrina DanielSep 13, 2025
  If your Toro Lawn Mower has an uneven cutting height, check these: * Blades might not be sharp; sharpen the blades. * Cutting blades may be bent; install new cutting blades. * Mower might not be level; level mower from side-to-side and front-to-rear. * Underside of the mower might be dirty; clean the underside of the mower. * Tire pressure might not be correct; adjust the tire pressure.
W
wolfejoshuaSep 15, 2025
Why is my Toro Mower vibrating abnormally?
- B
  Brandon GeorgeSep 15, 2025
  Abnormal vibration can be caused by: * Bent or unbalanced cutting blade(s); install new cutting blade(s). * A loose blade mounting bolt; tighten it. * Loose engine mounting bolts; tighten them. * A loose engine pulley, idler pulley, or blade pulley; tighten the appropriate pulley. * A damaged engine pulley, bent blade spindle, or loose/worn motor mount; in any of these cases, contact an Authorized Service Dealer.
L
Lindsay BellSep 18, 2025
Why does my Toro Mower not drive?
- J
  Jesse SanchezSep 18, 2025
  If the machine does not drive: * The bypass valve might not be closed tight; tighten it. * The drive or pump belt might be worn, loose, or broken; change the belt. * The drive or pump belt might be off a pulley; change the belt. * The idler spring might be broken or missing; replace the spring. * The hydraulic fluid level could be low or too hot; add hydraulic fluid to the reservoir or let it cool down.

Toro 74271 Specifications

General

Deck Type	Fabricated
Number of Blades	3
Starting System	Electric
Deck Material	Steel
Engine	Kohler
Seat	High Back
Hour Meter	Yes
Wheel Size	15 inches (front)

Related product manuals

Preview: Toro 74274

Preview: Toro 74248