Toro 74445 - Controls System Maintenance; Adjusting the Control Handle Neutral Position

Note:Increasethetensionbylengtheningthepush
arms;decreasethetensionbyshorteningthepush
arms.
ControlsSystem
Maintenance
AdjustingtheControlHandle
NeutralPosition
Ifthemotioncontrolleversdonotalignormoveeasily
intotheconsolenotch,adjustmentthem.Adjusteach
lever,spring,androdseparately.
Note:Themotioncontrolleversmustbeinstalled
correctly.SeeInstallingtheMotionControlLeversin
theSetupInstructions.
1.DisengagethePTO,movethemotioncontrollevers
totheneutrallockedposition,andsettheparking
brake.
2.Stoptheengine,removethekey,andwaitforall
movingpartstostopbeforeleavingtheoperating
position.
3.Tilttheseatforward.
4.Beginwitheithertheleftorrightmotioncontrol
lever.
5.Movelevertotheneutralpositionbutnotlocked
(Figure55).
Figure55
1.Neutrallockedposition3.Neutralposition
2.Controllever
6.Pulltheleverbackuntiltheclevispin(onthe
armbelowthepivotshaft)contactstheendofthe
slot(justbeginningtoputpressureonthespring)
(Figure56).
41