How to stop abnormal vibration in my Toro 74502?
Abnormal vibration in your Toro Riding mower can be caused by loose engine mounting bolts, a loose engine pulley, idler pulley, or blade pulley, bent or unbalanced cutting blade(s), or a loose blade mounting bolt. To address this, tighten the engine mounting bolts, tighten the appropriate pulley, install a new cutting blade(s), and tighten the blade mounting bolt.
What causes the blades to not rotate on my Toro Riding mower?
If the blades on your Toro Riding mower are not rotating, it could be due to a worn, loose, or broken drive belt, the drive belt being off of the pulley, or a worn, loose, or broken mower belt. You can install a new drive belt, install the drive belt and check the adjusting shafts and belt guides for the correct position, or install a new mower belt.
General| Engine | Kohler Command Pro 747cc |
|---|---|
| Engine Power | 25 hp |
| Cutting Width | 60 in |
| Transmission Type | Hydrostatic |
| Transmission | Hydrostatic |
| Fuel Capacity | 12 gal |
| Weight | 1490 lb |
| Drive System | 2WD |
To Next Page
