What to do if the blades do not rotate on my Toro 74704?
If the blades on your Toro Lawn Mower aren't rotating, it could be due to a worn, loose, or broken drive belt; in this case, install a new drive belt. Also, the drive belt may be off of the pulley; install the drive belt and check the adjusting shafts and belt guides for the correct position. If the mower belt is worn, loose, or broken, install a new mower belt.
What to do if the starter does not crank on my Toro 74704 Lawn Mower?
If the starter on your Toro Lawn Mower isn't cranking, make sure to move the PTO to Disengaged, move the motion control levers to the brake position, and sit on the seat. You should also charge the battery, check the electrical connections for good contact, and replace the fuse.
How to fix Toro 74704 when the engine overheats?
If the engine of your Toro Lawn Mower overheats, reduce the ground speed, add oil to the crankcase, remove any obstructions from the cooling fins and air passages, and clean or replace the air cleaner element.
General| Model | 74704 |
|---|---|
| Power Source | Gasoline |
| Deck Material | Steel |
| Start Type | Recoil |
| Engine Type | 4-cycle |
| Drive System | Rear Wheel Drive |
| Cutting Height Adjustment | 4-Point |
| Type | Walk-Behind Mower |
| Engine | Briggs & Stratton® |
| Warranty | 2-Year Full Coverage |
Safety instructions for operating the machine safely.
Guidelines for operating the machine safely and efficiently.
Guidelines for safe operation on slopes to prevent accidents.
Safety precautions regarding children near the operating machine.
Safety guidelines and limitations for towing attachments.
Specific safety information for Toro riding mowers.
Precautions for safe handling and storage of gasoline.
General maintenance and safety checks for the machine.
Recommended gasoline, stabilizer, and filling procedures.
Procedure for checking the engine oil level.
Emphasizes the importance of safety before operating the machine.
Identification and description of machine controls.
Instructions for setting and releasing the parking brake.
Procedures for starting and stopping the engine.
How to engage and disengage the power take off.
Explanation and testing of the machine's safety interlock system.
Procedure for safely stopping the machine.
How to adjust the cutting height of the mower deck.
Adjusting anti-scalp rollers for deck flotation.
How to adjust the operator's seat for comfort and control.
Adjusting motion control levers for operator comfort.
Procedure for manually moving the machine.
Information about the mower's side discharge feature.
Advice on throttle, cutting, direction, speed, and grass length.
Guidance on maintaining sharp and undamaged mower blades.
Safety rules for towing equipment with the mower.
Importance and method of cleaning the mower underside.
Schedule outlining maintenance tasks based on service intervals.
Procedure for checking the engine oil level.
Steps for draining and changing the engine oil.
Cleaning and installing foam and paper air cleaner elements.
How to inspect the condition and gap of the spark plug.
Checking mower blades for sharpness, wear, and damage.
Procedure to check if mower blades are bent.
Steps to safely remove mower blades.
How to sharpen mower blades to maintain optimal cutting.
Procedure for installing mower blades.
Instructions for lubricating grease fittings on the machine.
Steps to safely remove the battery from the tractor.
Steps to safely install the battery onto the tractor.
Procedure for checking the battery electrolyte level.
How to add distilled water to the battery cells.
Instructions for charging the mower's battery.
Draining the fuel tank and replacing the fuel filter.
Checking and adjusting tire pressure for proper operation.
How to ensure the mower deck is level side-to-side.
Procedure for replacing the mower drive belt.
Steps to safely attach the mower deck to the tractor.
How to replace the grass deflector.
To Next Page
