Toro 74750 - Adjustments and Stopping; Stopping the Machine

StoppingtheMachine
Tostopthemachine,movethemotion-controlleversto
theNEUTRALpositionandoutwardtothePARKposition,
disengagetheblade-controlswitch,ensurethethrottleisat
fullthrottle,andturntheignitionkeytooff.Removethe
keyfromtheignitionswitch.
WARNING
Childrenorbystandersmaybeinjuredifthey
moveorattempttooperatethemowerwhileitis
unattended.
Alwaysremovetheignitionkeyandmovethe
motion-controlleversoutwardtothePARKposition
whenleavingthemachineunattended,evenifjust
forafewminutes.
AdjustingtheHeightofCut
Note:Thetransportpositionisthehighestheight-of-cut
positionorcuttingheight115mm(4.5inches)asshownin
Figure18.
Heightofcutiscontrolledbytheleverlocatedtotherightof
theoperatingposition(Figure18).
Figure18
20