To Next Page
H
Hannah ChavezAug 21, 2025
What to do if Toro Lawn Mower cutting height is uneven?
- VvjohnsonAug 21, 2025
Uneven cutting height on your Toro Lawn Mower can be due to several reasons. First, check if the blade(s) is sharp and sharpen it if necessary. Second, inspect the cutting blade(s) for bending and replace it if bent. Third, ensure the mower is level from side-to-side and front-to-rear. Fourth, verify that the anti-scalp wheel is set correctly and adjust its height if needed. Fifth, clean the underside of the mower. Sixth, adjust the tire pressure.
General
