Need help?Do you have a question about the Toro 74924 TITAN ZX5420 and is the answer not in the manual?
General| Cutting Width | 54 inches |
|---|---|
| Blade Tip Speed | 18, 000 fpm |
| Cutting Height | 1.5 to 4.5 inches |
| Transmission | Hydrostatic |
| Deck Material | 10-gauge steel |
| Speed | 8.5 mph |
| Warranty | 3 years limited |
Warns against using non-original parts and unauthorized engine changes.
Instructions to reduce potential for injury when operating the machine.
Detailed safety instructions and precautions for operating on slopes.
Warns about hazards of sliding on slopes and rollover risks.
Details how to use the ROPS for safety and warnings associated with it.
Warns about fire and explosion risks from static electricity during fueling.
Reiteration of dangers associated with gasoline, fire, and explosion.
Explains the safety interlock system and its importance.
Warns about thrown debris from open mower holes.
Reiteration of thrown debris hazard from open mower holes.
Warns about injury from uncovered openings and contact with blades.
Warns about accidental starting if the key is left in the ignition.
Warns about explosive battery gases.
Importance of sharp blades and how to service them.
Warns about severe injury or death from broken or damaged blades.
Procedure to check if mower blades are bent.
Warns about injury from thrown blade pieces during sharpening.
Warns about injury from uncovered openings and contact with blades.
Lists possible causes and solutions for the starter not cranking.
Diagnoses for engine starting issues and solutions.
Possible causes and solutions when the machine does not drive.
To Next Page