- 2 -
Setting the Time/Date:
1. Turn the dial to time/date, the hour will flash, press the plus or the minus to
increase or decrease the hour.
2. Press next to program the minutes.
3. Press the next to program the current year.
4. Press next to program the current month.
5. Press next to program the current day.
6. Press next and 12H or 24H will flash for the time format, just press next and it will
show the current time.
Setting the Watering Days: (Calendar Schedule)
1. Turn the dial to watering days and Cal will flash.
2. Press next and Sunday at the bottom will flash.
3. Press plus to select the day you want and the minus to remove a day that you
don’t want.
4. Press the “plus” button to turn the days on.
Setting the Interval Schedule:
1. Turn the dial to watering days.
2. Press plus or the minus as needed to display INT for the interval setting.
3. Press next and the current interval number will flash. (1-7)
4. To change to interval number, press the “+” or “-- ” buttons.
5. Press “next” and the interval start day will flash.
6. To change the interval start day, press “+/on” or “-/off” buttons.
Setting the Odd or Even Schedule:
1. Turn the dial to watering days.
2. If odd or even does not does not display, press the plus or minus as needed to
select the odd or even setting.
Note: Check to see if the Day exclusion Feature is turned on, because if it is set to “OFF”
the system will not turn on automatically from the timer.
To Next Page
Loading...
Need help?
General
