Toro GrandStand 74583 - Operating the Ignition Switch; Using the Fuel Shut-Off Valve; Starting and Stopping the Engine

OperatingtheIgnitionSwitch
1.TurntheignitionkeytotheStartposition(Figure12).
Whentheenginesstarts,releasethekey.
Important:Donotengagethestarterformore
than5secondsatatime.Iftheenginefailsto
start,allowa15secondcool-downperiodbetween
attempts.Failuretofollowtheseinstructionscan
burnoutthestartermotor.
Note:Additionalstartingcyclesmayberequired
whenstartingtheengineforthersttimeafterthefuel
systemhasbeenwithoutfuelcompletely.
START
RUN
ST OP
G008947
Figure12
2.Turntheignitionkeytostoptoturnofftheengine.
UsingtheFuelShut-offValve
Closethefuelshut-offvalvefortransport,maintenance,and
storage(Figure13).
Ensurethatthefuelshut-offvalveisopenwhenstartingthe
engine.
g017735
G008948
1
2
Figure13
1.Onposition2.Offposition
StartingandStoppingthe
Engine
StartingtheEngine
1.Connectthewirestothesparkplugs.
2.Openthefuelvalve.
3.Movetherightmotion-controllevertoneutrallocked
position.
4.Settheparkingbrake;refertoSettingtheParking
Brake.
5.Movetheblade-controlswitch(PTO)totheOff
position.
6.MovethethrottlelevermidwaybetweentheSlowand
Fastpositions.
17