Toro GrandStand Series - Page 110

CHASSIS
3-89Toro GrandStand Service Manual
3
78. Push the clutch wire and frame grommet down
through the engine base (Fig. 0334).
Fig. 0334 DSCN-1092a
79. 2009 only: Remove the bolt, washers, spacer and
nut securing the clutch brake strap to the engine
base (Fig. 0335).
Fig. 0335 IMG-9755
80. 2010 only: Remove the nut securing the thread
forming screw used to secure the clutch anchor (Fig.
0336).
Fig. 0336 DSCN-1096a
81. 2010 only: Remove the thread forming screw
securing the clutch anchor to the engine base (Fig.
0337).
Fig. 0337 DSCN-1094a