CHASSIS
3-104 Toro GrandStand Service Manual
3
45. 2010 only: Place a spacer into the front end of the
shifter link (Fig. 0391).
47. Install the washer and hairpin cotter to the end of the
speed control linkage (Fig. 0393).
Fig. 0391 IMG-0946a
46. 2010 only: Secure the shifter link to the shifter
bracket with a bolt, two washers and nut (Fig. 0392).
Fig. 0392 IMG-0905a
Fig. 0393 IMG-9424a
48. Secure the solenoid to the engine base using two
thread forming screws (Fig. 0394).
Fig. 0394 DSCN-1222a
To Next Page
Loading...
