Toro GrandStand Series - Page 126

CHASSIS
3-105Toro GrandStand Service Manual
3
49. Secure the starter cable to the solenoid post using
the nut and lock washer (Fig. 0395).
Fig. 0395 DSCN-1224a
50. Position the rear cross shaft assembly onto the
engine base (Fig. 0396).
Fig. 0396 DSCN-1228a
Note: The grease blocks must be positioned with
the grease zerk facing upward (Fig. 0397).
Fig. 0397 DSCN-1232a