CHASSIS
3-122 Toro GrandStand Service Manual
3
114. 2010 only: Secure the lower end of the lift bar to
the rear cross shaft assembly using the dampener
assembly and nut. Thread the dampener assembly
bolt into the nut until there are 3 threads protruding
(Fig. 0459).
Fig. 0459 DSCN-0793a
115. Position the battery on the battery tray (Fig. 0460).
Fig. 0460 DSCN-1493a
116. Secure the red positive cable to the positive
terminal on the battery using a bolt, washer and
nut (Fig. 0461).
Fig. 0461 DSCN-1495a
Note: Position the red protective boot over the
terminal once the cable is secured (Fig. 0462).
Fig. 0462 DSCN-1497a
To Next Page
Loading...
