CHASSIS
3-124 Toro GrandStand Service Manual
3
4. 2010 only: Remove the dampener assembly that
secures the lift bar to the rear cross shaft assembly
(Fig. 0467).
Fig. 0467 DSCN-0793a
5. Remove the fuel tank. See “Fuel Tank Assembly
Removal” on page 3-26.
6. Remove the cable ties securing the high-pressure
hoses (Fig. 0468).
Fig. 0468 DSCN-0689a
7. Mark the hydraulic ttings and hoses so they can be
correctly installed upon reassembly (Fig. 0469).
Fig. 0469 DSCN-0691a
8. Remove the high-pressure hoses from the pump
ttings (Fig. 0470).
Note: Cap the pump and hose ttings to prevent
debris from entering the hydraulic system.
Fig. 0470 DSCN-0696a
To Next Page
Loading...
