Toro GrandStand Series - Page 148

CHASSIS
3-127Toro GrandStand Service Manual
3
16. Remove the four carriage bolts and nuts securing
the mufer guard and guard panel to the carrier
frame, then remove both (Fig. 0478).
Fig. 0478 DSCN-0932a
Note: 48” and 52” models use two guard mounting
brackets instead of the single guard panel
(Fig. 0479).
Fig. 0479 IMG-0586a
17. Remove the shoulder bolts, washers and nuts
securing the LH and RH lift links to the deck (Fig.
0480).
Fig. 0480 DSCN-0935a
18. Loosen the cable clamp securing the choke cable to
the engine throttle plate, then remove the cable from
the clamp (Fig. 0481).
Fig. 0481 DSCN-0941a