Toro GrandStand Series - RH Motion Control Lever Replacement

CONTROLS
4-4 Toro GrandStand Service Manual
4
RH Motion Control Lever
Replacement
RH Motion Control Lever Removal
4. Secure the control cable to the motion control lever
using a bolt, nut and spacer (Fig. 0641).
1. Remove the bolt, nut & spacer securing the end of
the control cable to the RH motion control lever (Fig.
0642).
Fig. 0641 IMG-0953a
Fig. 0642 IMG-0974a
2. Unplug the wire harness from the OPC switch (Fig.
0643).
Fig. 0643 IMG-0976a