Toro GrandStand Series - Page 214

CONTROLS
4-27Toro GrandStand Service Manual
4
11. 2009 Only: Secure the front end of the LH shifter
link to the shifter bracket using a hairpin cotter and
washer (Fig. 0733).
10. 2009 only: Serial range 290000210 and up: Slide
the left hand roller onto the rear end of the LH shifter
link rod and into the outside of the control fork as-
sembly (Fig. 0732).
12. 2010 Only: Slide 3 rollers onto the rear end of the
LH shifter link. Slide the rear end of the shifter link
(with three rollers) into the control fork assembly
(Fig. 0734).
Fig. 0732 IMG-9365a
Fig. 0733 IMG-9422a
Fig. 0734 IMG-1038a
13. 2010 Only: Place a spacer into the front end of the
shifter link (Fig. 0735).
Fig. 0735 IMG-0946a