CONTROLS
4-28 Toro GrandStand Service Manual
4
14. 2010 Only: Secure the shifter link to the shifter
bracket with a bolt two washers and nut (Fig. 0736).
15. Using a cable tie, secure the neutral switch plates
with the switch stop arm nested between them (Fig.
0737).
16. Insert a 7/32
nd
Allen wrench into the slots of the
control fork and control arm in front of the speed
control linkage rollers (Fig. 0738).
Fig. 0736 IMG-0346_b
Fig. 0737 IMG-1052a
Fig. 0738 DSC-0504a
To Next Page
Loading...
