Toro GrandStand Series - Page 217

CONTROLS
4-30 Toro GrandStand Service Manual
4
22. Secure the end of the control cable to the control
fork using the bolt, nut and spacer (Fig. 0745).
Fig. 0745 IMG-1061a
21. Secure the cable to the linkage mount with the
spring clip (Fig. 0744).
Fig. 0744 IMG-1022a
20. Position the motion control cable adjustment nut into
the slot on the linkage mount (Fig. 0743).
Fig. 0743 IMG-1058a