Toro GrandStand Series - Page 223

CONTROLS
4-36 Toro GrandStand Service Manual
4
7. Secure the shifter bracket assembly to the engine
base using two thread forming screws (Fig. 0766).
Fig. 0766 IMG-0153a
Note: The speed control cable must be routed be-
tween the LH pump RTN (Return to Neutral)
mechanism, then upward behind the linkage
mount (Fig. 0767).
Fig. 0767 IMG-1086a
8. Using a spring tool, hook the “J” end of the torsion
spring to the lower shifter bracket (Fig. 0768).
9. 2009 Only: Secure the front end of the shifter links
to the shifter bracket using a hairpin cotter and
washer (Fig. 0769).
Fig. 0768 IMG-1121a
Fig. 0769 IMG-0348a