Toro GrandStand Series - Page 224

CONTROLS
4-37Toro GrandStand Service Manual
4
10. 2010 Only: Place a spacer into the front end of the
shifter links (Fig. 0770).
Fig. 0770 IMG-0946a
11. 2010 Only: Secure the shifter links to the shifter
bracket with a bolt two washers and nut (Fig. 0771).
Fig. 0771 IMG-0346a
12. 2010 Only: Repeat steps 10 & 11 on the opposite
shifter link.
13. Hook the “Z” bend of the speed control cable to the
speed control lever assembly and secure with the
cable clip (Fig. 0772).
Fig. 0772 IMG-0150a
14. Secure the lever assembly to the control tower using
two screws and nuts, then install the handle knob
(Fig. 0773).
Fig. 0773 IMG-0145a