Toro GrandStand Series - Page 225

CONTROLS
4-38 Toro GrandStand Service Manual
4
16. Pull rearward on the cable jacket to remove any
slack, then tighten the cable clamp securing the
cable jacket to the shifter bracket (Fig. 0775).
15. Move the speed control lever to the “FAST” position
(Fig. 0774).
Fig. 0774 PICT-9749a
Fig. 0775 DSC-0488a
17. Using cable ties, secure the speed control cable to
the RH control cable and the left side of the linkage
mount (Fig. 0776).
Fig. 0776 IMG-1089a