Toro GrandStand Series - Page 232

CONTROLS
4-45Toro GrandStand Service Manual
4
7. Position the adjustment nut of the control cable in
the linkage mount (Fig. 0799).
Fig. 0799 IMG-1035a
8. Secure the control cable to the linkage mount using
the spring clip (Fig. 0800).
Fig. 0800 IMG-1009a
9. Secure the lower end of the control cable to the con-
trol fork using a bolt, spacer, and nut (Fig. 0801).
Fig. 0801 IMG-1033a