Toro GrandStand Series - Page 239

CONTROLS
4-52 Toro GrandStand Service Manual
4
Throttle Cable Installation
1. Hook the “Z” bend of the speed control cable to the
speed control lever assembly and secure with the
cable clip (Fig. 0823).
Fig. 0823 IMG-1160a
2. Secure the lever assembly to the control tower using
two screws and nuts (Fig. 0824).
Fig. 0824 IMG-1158a
3. Apply medium strength thread-locking material to the
threads of the handle knob (Fig. 0825).
Fig. 0825 IMG-1161a
4. Install the handle knob to the throttle lever (Fig.
0826).
Fig. 0826 IMG-1156a