Toro GrandStand Series - Page 240

CONTROLS
4-53Toro GrandStand Service Manual
4
6. Feed the throttle cable through the ”R” clamp located
on the front, lower corner of the control tower (Fig.
0828).
5. Route the throttle cable downward between the con-
trol cables and fuel tank, then forward under the fuel
tank shelf (Fig. 0827).
Fig. 0827 IMG-1162a
Fig. 0828 IMG-1167a
7. Feed the throttle cable through the mufer mount
(Fig. 0829).
Fig. 0829 IMG-1171a
8. Install the throttle cable “Z” bend into the engine
throttle lever (Fig. 0830).
Fig. 0830 IMG-1154a