Toro GrandStand Series - Page 241

CONTROLS
4-54 Toro GrandStand Service Manual
4
13. Ensure the throttle is functioning correctly by moving
the throttle lever from “FAST” to “SLOW” while
observing the engine throttle lever.
11. While holding the engine throttle lever in the “Fast”
position, pull the slack from the cable jacket (Fig.
0833).
Fig. 0833 DSCN-1578a
12. Secure the position of the throttle cable with the
screw and cable clamp (Fig. 0834).
Fig. 0834 IMG-1127a
9. Position the throttle cable to the engine throttle plate
and loosely install the screw and cable clamp (Fig.
0831).
Fig. 0831 IMG-1127a
10. Move the throttle lever to the “FAST” position (Fig.
0832).
Fig. 0832 IMG-1172a