ENGINE
5-7Toro GrandStand Service Manual
5
27. Remove the bolt, spring washer and washer secur-
ing the clutch to the engine crankshaft (Fig. 0859).
29. Remove the four engine mounting bolts and Belle-
ville washers securing the engine to the engine base
(Fig. 0861).
Fig. 0859 IMG-0506a
28. Lower the clutch onto the top of the mower deck
(Fig. 0860).
Fig. 0860 IMG-0507a
Fig. 0861 IMG-0516a
30. Remove the engine from the engine base (Fig.
0862).
Note: The electric PTO clutch and drive pulley will
slide off the engine crankshaft when remov
ing the engine from the engine base.
Fig. 0862 IMG-0517a
To Next Page
Loading...
