Toro GrandStand Series - Page 249

ENGINE
5-8 Toro GrandStand Service Manual
5
31. Remove the square key from the engine crankshaft
(Fig. 0863).
32. Remove the two bolts, spacers and nuts securing
the left and right side mufer brackets to the mufer
(Fig. 0864).
34. Remove the four bolts and lock washers (2 per side)
securing the right and left hand mufer brackets to
the engine (Fig. 0866).
33. Remove four nuts and lock washers securing the
mufer to the engine (Fig. 0865).
Fig. 0863 IMG-0520a
Fig. 0864 IMG-0542a
Fig. 0865 IMG-0522a
Fig. 0866 IMG-0528a