Toro GrandStand Series - Page 250

ENGINE
5-9Toro GrandStand Service Manual
5
Engine Installation
4. Install the two bolts, spacers, and nuts securing the
left and right side mufer brackets to the mufer (Fig.
0870).
1. Secure the RH and LH mufer brackets to the en-
gine using four bolts and lock washers (Fig. 0867).
3. Secure the mufer to the engine using four nuts and
lock washers. Torque to 19 ± 2 ft-lbs. (26 ± 3 Nm)
(Fig. 0869).
Fig. 0867 IMG-0528a
2. Position a new exhaust gasket on the exhaust studs
for both exhaust ports (Fig. 0868).
Fig. 0868 IMG-0531a
Fig. 0869 IMG-0532a
Fig. 0870 IMG-0542a