ENGINE
5-13Toro GrandStand Service Manual
5
19. Install the deck drive belt. Ensure the deck drive belt
is routed properly around the mower deck pulleys.
Refer to belt routing decal 117-0486 (Fig. 0883).
21. Install the right hand mower belt cover (Fig. 0885).
Fig. 0883 g. 1 117-0486
20. With a spring tool, install the extension spring to the
spring anchor bracket (Fig. 0884).
Fig. 0884 IMG-0487a
Fig. 0885 IMG-0485a
22. Hook the “Z” bend of the throttle cable into the
throttle control lever and loosely clamp the outer
housing of the throttle cable with the cable clamp
(Fig. 0886).
Fig. 0886 IMG-0575a
To Next Page
Loading...
