Toro GrandStand Series - Page 255

ENGINE
5-14 Toro GrandStand Service Manual
5
23. Move the throttle lever to the “Fast” position (Fig.
0887).
24. With the engine throttle control lever in the “Fast”
position, pull the slack from the cable jacket and
tighten the throttle cable clamp (Fig. 0888).
25. Hook the “Z” bend of the choke cable into the choke
control lever and loosely clamp the outer housing of
the choke cable with the cable clamp (Fig. 0889).
Fig. 0887 DSC-4512a
Fig. 0888 IMG-0576a
Fig. 0889 IMG-0579a
26. Push the choke knob in so it is in the “Open” position
(Fig. 0890).
Fig. 0890 DSC-4515a