Toro GrandStand Series - Page 266

HYDRAULIC DRIVE SYSTEM
6-7Toro GrandStand Service Manual
6
3. Place the large spacer, one friction composite wash-
er and bushing onto the pivot bolt (Fig. 0924).
Fig. 0924 IMG-0818a
5. Place one friction composite washer and steel wash-
er onto the pivot bolt (Fig. 0926).
Fig. 0926 IMG-0820a
4. Place the idler assembly onto the pivot bolt (Fig.
0925).
Fig. 0925 IMG-0819a
6. Secure the idler assembly with a nut (Fig. 0927).
Fig. 0927 IMG-0806a