Toro GrandStand Series - Page 275

HYDRAULIC DRIVE SYSTEM
6-16 Toro GrandStand Service Manual
6
33. Remove the spring clip from the drive linkage mount
(Fig. 0958).
Fig. 0958 IMG-9350a
34. Remove the 2 traction control cables from the drive
linkage mount slots (Fig. 0959).
Fig. 0959 IMG-9351a
32. Remove the 4 self-tapping screws securing the
tower to the frame (Fig. 0957).
Fig. 0957 IMG-9516a
31. Remove the nuts from the 4 self-tapping screws
securing the tower to the frame (Fig. 0956).
Fig. 0956 IMG-9516a