HYDRAULIC DRIVE SYSTEM
6-28 Toro GrandStand Service Manual
6
Note: 2010 models use a nut to secure the upper
end of the parking brake rod (Fig. 1003).
Fig. 1003 DSCN-0261a
21. Slide the top end of the brake rod into the brake
handle. Install a hairpin cotter to secure the top end
of the parking brake rod to the brake handle (Fig.
1002).
Fig. 1002 IMG-9347
22. Position the fuel line r-clamp to the frame and install
a bolt and nut to secure (Fig. 1004).
Fig. 1004 IMG-9329a
23. Tighten the bolt and nut through the lower mounting
holes securing the strike plate to the tower (Fig.
1005).
Fig. 1005 IMG-9316a
To Next Page
Loading...
