Toro GrandStand Series - Page 313

HYDRAULIC DRIVE SYSTEM
6-54 Toro GrandStand Service Manual
6
20. Install 3 push cable ties through the holes located in
the base of the tower (Fig. 1100).
Fig. 1100 IMG-9524a
21. Slide the top end of the brake rod into the brake
handle. Install a hairpin cotter to secure the top end
of the parking brake rod to the brake handle (Fig.
1101).
Fig. 1101 IMG-9347a
Note: 2010 models use a nut to secure the upper
end of the parking brake rod (Fig. 1102).
Fig. 1102 DSCN-0261a