HYDRAULIC DRIVE SYSTEM
6-55Toro GrandStand Service Manual
6
22. Position the fuel line r-clamp to the frame and install
a bolt and nut to secure (Fig. 1103).
Fig. 1103 IMG-9329a
23. Tighten the bolt and nut securing the strike plate to
the tower (Fig. 1104).
Fig. 1104 IMG-9316a
24. Slide the 2 traction control cables into the drive
linkage mount slots (Fig. 1105).
Fig. 1105 IMG-9351a
25. Install the spring clip into the drive linkage mount
(Fig. 1106).
Fig. 1106 IMG-9350a
To Next Page
Loading...
