Toro GrandStand Series - Page 325

HYDRAULIC DRIVE SYSTEM
6-66 Toro GrandStand Service Manual
6
19. Position a drain pan under the wheel motor (Fig.
1142).
Fig. 1142 IMG-9944a
20. Disconnect both hydraulic hoses from the wheel
motor (Fig. 1143).
Fig. 1143 IMG-9879a
21. Cap the hose ends and wheel motor ttings so that
debris does not enter the system (Fig. 1144).
Fig. 1144 IMG-9885a
22. Loosen the jam nuts on the upper wheel motor tting
(Fig. 1145).
Fig. 1145 IMG-9893a