Toro GrandStand Series - Power Take Off (PTO) Switch Removal

ELECTRICAL
8-13Toro GrandStand Service Manual
8
Power Take Off (PTO) Switch Removal
1. Remove the wire harness from the back of the PTO
switch (Fig. 1456).
3. Remove the switch through the front of the control
panel (Fig. 1458).
Fig. 1456 IMG-1240a
2. Depress the four tabs securing the switch to the
control panel (Fig. 1457).
Fig. 1457 IMG-1243a
Fig. 1458 IMG-1246a