Toro GrandStand Series - Page 444

ELECTRICAL
8-35Toro GrandStand Service Manual
8
3. Secure the starter positive cable to the LH solenoid
stud with a nut and lock washer (Fig. 1536).
5. Position the positive cable terminal cover over the
terminal connection (Fig. 1538).
Fig. 1536 IMG-1294a
4. Secure the positive battery cable and red wire eyelet
to the solenoid using a nut and lock washer (Fig.
1537).
Fig. 1537 IMG-1289a
Fig. 1538 IMG-1299a
6. Secure the black ground cable to the battery nega-
tive terminal (Fig. 1539).
Fig. 1539 IMG-1287a