Toro GrandStand Series - Parking Brake Switch Removal; Parking Brake Switch Installation

ELECTRICAL
8-39Toro GrandStand Service Manual
8
Parking Brake Switch Removal Parking Brake Switch Installation
1. Remove the wire harness from the switch (Fig.
1551).
1. Loosely install the two screws and threaded plate
that secure the switch to the brake assembly (Fig.
1553).
Fig. 1551 IMG-1281a
2. Remove the two screws and threaded plate that
secure the switch to the brake assembly and remove
the switch (Fig. 1552).
Fig. 1552 IMG-1283a
Fig. 1553 IMG-1283a