Toro GrandStand Series - Page 74

CHASSIS
3-53Toro GrandStand Service Manual
3
Wheel Motor Housing Assembly Installation
20. Remove the four sets (2 per side) of fasteners se-
curing the wheel motor housing assembly to the
carrier frame (Fig. 0196).
1. Secure the motor mount center section to the motor
mounts using eight carriage bolts and nuts (Fig.
0198).
Fig. 0196 DSCN-0652a
21. Remove the wheel motor housing assembly.
22. Remove the eight carriage bolts and nuts securing
the motor mount center section to the RH and LH
motor mounts (Fig. 0197).
Fig. 0197 DSCN-0658a
Fig. 0198 DSCN-0658a
Note: The wheel motor housing assembly can be
congured for a wide stance (Fig. 0198) or a
narrow stance (Fig. 0199).
Fig. 0199 DSCN-0661a