CHASSIS
3-56 Toro GrandStand Service Manual
3
15. Repeat steps 10 through 14 on the other side of the
machine.
16. Remove the jack stands and lower the machine to
the ground.
17. Apply the parking brake.
12. Apply thread-locking compound to the wheel motor
shaft threads (Fig. 0208).
14. Secure the tire assembly to the wheel hub using four
lug nuts (Fig. 0210).
Note: The lug nuts will have the proper torque
applied in a later step.
Fig. 0208 DSCN-0679a
13. Install the wheel motor nut to the wheel motor shaft
(Fig. 0209).
Note: The wheel motor nut will have the proper
torque applied in a later step.
Fig. 0209 DSCN-0680a
Fig. 0210 DSCN-0683a
To Next Page
Loading...
