Greensmaster Flex 1800/1820/2100/2120Belt Driven Groomer (Optional) Page 8 − 2
Specifications
MOUNTING: The groomer is mounted to the cutting unit
side plates.
GROOMING REEL CONSTRUCTION: 2.375 inch (6
cm) diameter, 41 steel blades with 1/2 inch blade spac-
ing. Blade spacing can be adjusted to 1/4 inch or 3/4 inch
by altering the number and position of blade spacers on
the groomer. Grooming reel is available with either steel
or carbide tipped blades. The groomer brush can be
installed in place of grooming reel.
GROOMER HEIGHT SETTING: From 0.030 to 0.620
inch (0.8 to 15.7 mm) at mowing HOC range of 0.060 to
0.750 inch (1.5 to 19.1 mm).
WIDTH−OF−GROOMER: 19.380 inches (50.3 cm).
HEIGHT ADJUSTMENT KNOB: Allows a 0.003 inch
(0.08 mm) increment of height adjustment for each click
of the adjuster.
UP−DOWN FEATURE: Allows grooming reel to be
raised above the height/depth adjustment for no groom-
ing reel action while mowing.
GROOMER DRIVE: Both forward rotating and counter
rotating groomer drive systems are available for the Flex
machines. The groomer drive assembly is attached to
the right side of the cutting unit.
To Next Page
Loading...
