EasyManua.ls Logo

Toro Greensmaster Flex21 04021 User Manual

Toro Greensmaster Flex21 04021
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Form No. 3352-305
Greensmaster® Flex21
Walk-Behind Mower
Model No. 04021 (Traction Unit) —Serial No. 250000001
and Up
Model No. 04200 (Cutting Unit) —Serial No. 250000001 and
Up
Register your product at www.Toro.com Original Instructions (EN)
Question and Answer IconNeed help?

Do you have a question about the Toro Greensmaster Flex21 04021 and is the answer not in the manual?

Toro Greensmaster Flex21 04021 Specifications

General IconGeneral
Cutting Width21 inches
Engine Type4-cycle
Fuel TypeGasoline
Engine Displacement118 cc
EngineHonda® GX120 OHV

Summary

Introduction

Safety

Safe Operating Practices

Guidelines for safe operation of the mower, including training and preparation.

Toro Mower Safety

Specific safety information for Toro products, emphasizing operator skill and training.

Setup

Installing the Handle

Procedure for attaching the handle to the mower unit.

Adjusting the Handle

Steps to adjust the handle to the desired operating position.

Installing the Transport Wheels

Instructions for attaching optional transport wheels to the mower.

Checking Fluid Levels

Guidance on checking engine oil and transmission fluid levels.

Installing the Grass Basket

Procedure for correctly attaching the grass basket.

Reading Manuals and Viewing Video

Recommendations for reviewing provided documentation and videos before operation.

Product Overview

Controls Overview

Identification and function of the mower's main controls.

Throttle Control

Description of the throttle control lever and its operation.

Traction & Reel Drive Engagement

Explanation of the traction and reel drive engagement lever.

Service/Parking Brake

Details on the operation and function of the service/parking brake.

Operator Presence Control

Information on the operator presence control system.

Choke Lever

Description of the choke lever for starting the engine.

Fuel Shut-Off Valve

Function and operation of the fuel shut-off valve.

Specifications

Technical details and measurements of the mower.

Attachments and Accessories

Information on approved attachments and accessories for the mower.

Operation

Think Safety First

Crucial safety advice and reading of decals before operating the mower.

Checking Engine Oil Level

Procedure for checking the engine oil level before each use.

Filling the Fuel Tank

Instructions and safety precautions for refueling the mower.

Starting and Stopping the Engine

Step-by-step guide for starting and stopping the mower's engine.

Transport Operation

Procedures for safely transporting the mower from one area to another.

Preparing to Mow

Steps to take before commencing mowing operations.

Mowing Operation

Guidance on proper mowing techniques and considerations for turf quality.

Method of Mowing

Techniques for mowing greens to ensure optimal turf appearance.

Control Operation

How to operate the mower's controls during mowing.

After Mowing

Tasks to perform after completing mowing operations.

Maintenance

Recommended Maintenance Schedule

A schedule outlining maintenance tasks and service intervals.

Daily Maintenance Checklist

A checklist for daily inspection and maintenance tasks.

Engine Oil Maintenance

Procedures for checking and changing the engine oil.

Servicing the Air Cleaner

Steps for cleaning and maintaining the air cleaner element.

Replacing the Spark Plug

Guide on how to replace the spark plug.

Fuel System Maintenance

Procedures related to cleaning the fuel filter.

Electrical System Maintenance

Instructions for servicing the interlock switch.

Drive System Maintenance

Information on checking and changing transmission fluid.

Brake Maintenance

Procedure for adjusting the service/parking brake.

Belt Maintenance

Instructions for adjusting reel and traction drive belts.

Controls System Maintenance

Procedures for adjusting traction and reel controls.

Separating Cutting Unit from Traction Unit

Steps to detach the cutting unit from the main mower body.

Leveling Rear Roller to Reel

Procedure for ensuring the rear roller is level with the reel.

Adjusting Bedknife to Reel

How to adjust the bedknife for proper reel contact.

Adjusting the Height of Cut

Steps to adjust the mower's cutting height.

Adjusting the Cut-Off Bar

Procedure for adjusting the cut-off bar for clean grass discharge.

Servicing the Bedbar

Instructions for removing and assembling the bedbar.

Backlapping the Reel

Procedure for backlapping the reel for sharpening.

Storage

Related product manuals