Figure 7
1. Kick stand
2. Press wheel loc king clip to w ard the center of wheel
and slide wheel onto hex shaft ( Figure 8 ).
Figure 8
1. Locking clip
3. R otate wheel bac k and for th until it slides
completely onto axle and loc king clip is secured
in g roo v e on axle shaft.
4. R e peat procedure on opposite side of mac hine .
5. Inflate the tires to 12-15 psi.
6. Carefully lift up on handle suppor t to release kic k
stand.
Step
4
Checking Fluid Levels
No Parts Required
Procedure
1. Chec k the engine oil lev el, refer to Chec king the
Engine Oil Lev el in Engine Maintenance , pag e 21 .
2. Chec k the transmission fluid lev el, refer to
Chec king the T ransmission Fluid Lev el in
Dri v e System Maintenance , pag e 23 .
Step
5
Installing the Grass Basket
Parts needed for this step:
1
Grass basket
Procedure
Grasp bask et b y top lip and slide bask et frame into the
recei v ers ( Figure 9 ).
Figure 9
1. Grass basket 2. Basket receivers
11
To Next Page
Loading...
