Toro Greensmaster Flex21 04021 - Product Overview; Controls Overview; Throttle Control; Traction & Reel Drive Engagement

Product Overview
Figure 10
1. Handle
5. Cutting unit
2. Control panel 6. Grass basket
3. Engine
7. Fuel tank
4. Transport wheels
Controls
Figure 11
1. Throttle control 3. Service/parking brake
2. Traction & reel drive
engagement lever
Throttle Control
T he throttle control ( Figure 11 ) is located on rear right
side of control panel. Lev er connects to and operates
throttle linkag e to carburetor . Engine speed can be
v aried from 2400 RPM to 3600 RPM.
Traction and Reel Drive Engagement
Lever
T he traction and reel dri v e eng ag ement lev er
( Figure 11 ) is located on front right side of control
panel. T raction lev er has tw o positions: Neutral and
F orw ard. Pushing lev er forw ard eng ag es traction dri v e .
T he reel dri v e lev er has tw o positions: Eng ag e and
Diseng ag e . Mo v e top of lev er to the left to eng ag e reel
or bac k to neutral to diseng ag e reel.
Service/Parking Brake
T he ser vice/parking brak e ( Figure 11 ) is located on
left front side of control panel. Pulling the lev er bac k
o v er center will set the parking brak e . Brak e m ust be
released before traction dri v e is eng ag ed.
Operator Presence Control
T he optional operator presence control m ust be
eng ag ed before eng aging the traction lev er or the
engine will stop .
Choke Lever
T he c hok e lev er ( Figure 12 ) is located on left front
of engine . Lev er has tw o positions: R un and Chok e .
Mo v e lev er to Chok e position when star ting a cold
engine . After engine star ts mo v e lev er to R un position.
Figure 12
1. Choke lever 2. Fuel shut-off valve
Fuel Shut-Off Valve
T he fuel shut-off v alv e ( Figure 12 ) is located on left
front of engine . V alv e has tw o positions: Closed and
Open. Mo v e lev er to closed position when storing
or transpor ting mac hine . Open v alv e before star ting
engine .
13